1223 S. 71st East Ave. Tulsa, OK 74112  USA (918)838-9811 office (918)838-1532 Facsimile
Turning Data into Information since 1946
Used when natural gamma log and deviation data is required. The natural gamma sensor is located near the bottom of the tool to permit data acquisition near the total depth of the borehole.  The deviation device uses two inclinometers and three magnetometers to determine precise borehole path and direction.  The small diameter (41mm/1.625in) of the tool allows logging in 2.0 ID PVC casing, non-metalic metal casings, or open holes.  The deviation test stand is recommend for both calibration of the device and routine tool checks for accuracy.
Natural Gamma / Deviation Tool
FEATURES Properties Measured 1.   Natural Gamma: 2.2 x 10.2 cm (0.875 x 4.0 in.) NAI Scintillation Offset: 139.7 cm (55 in.) 2.  Inclination & Azimuth:  2-axis Inclinometer and 3-axis Magnetometer.  Offset:  38.1 cm (15 in.)    Length: 154.4 cm (60.0 in.) Temperature: 85 C (185 F) Diameter: 41 mm (1.625 in.) Pressure: 281 kg/cm2 (4000 PSI) Weight: 7.46 kg (20 lb.) Logging Speed: 9 m/min. (30 ft./min.) Tool Voltage Required: 36 VDC TOOL#: 9702  
Home Products Services Rentals Support Careers Contact Us Userís Guide © All Rights Reserved- Century Geophysical, LLC 2015